Took about an hour to assemble with easy to follow instructions. Took about another hour to open and unwrap the two boxes as this unit was very carefully packaged and as a result there was no shipping damage. The only challenge is there are three different screw lengths so just use the correct screw as made clear in the illustrated instructions. I used a drill/driver with a clutch that ensures consistent torque on the screws. I am very pleased with the quality of this table and the heat output in my 40 degree F garage. Photos show the assembled unit, flame, flat table configuration and cover. The included black weather cover is quite durable. The glass windscreen arrives in the second box and is also carefully packaged. I'm now looking for an appropriate sized box to stow the rectangular glass assembly when not in use. Otherwise this is everything you need for an outdoor fire table that easily seats six people with plates.

There's a LOT of value in this fire pit table. I was going to build my own, but after finding this one, I just couldn't build one cost effectively in comparison. The materials, while good and not excellent. Good enough though. I like the fact it comes with the wind guard and cover. Both are excellent and the cover, in fact, is truly quite good - much better than the covers I recently purchased for my patio furniture (not cheap ones). I like the glass it comes with, but I felt I needed to supplement it with another 10lbs of glass (ordered and on its way). Even with the purchase of extra glass, the value is excellent.It went together quickly and well. I had an issue with one bolt that I need to address, but it's a minor point and there is another bolt less than 2" away, so I'm not concerned.I had a problem initially that the gas would not stay on without holding the control knob pressed in. After some research, I found it was likely to be the thermocouple. I adjusted the height of the thermocouple and it seemed to work. But, after about 15 minutes, it was back to needing the control knob held pressed in. I didn't know if it was the thermocouple or the valve at fault. I sought a new part from the company, put they don't offer any replacement parts. Their only solution was to return it or a partial refund. Returning was going to be a hassle, and I'm pretty handy, so I took the partial refund with the intention of replacing both the valve and thermocouple. When looking at the thermocouple so I could source a replacement I readjusted the height. At the last minute I also decided to check the connection to the valve. BINGO! The thermocouple was not even finger tight. I screwed it in snuggly with a wrench and that solved the problem. Now I'm very happy with it. If I were not handy enough to work the problem on my own, I'd probably be frustrated, but the fix turned out to be very easy and it gets 4 stars from me.

Bought this to complete the patio set.Overview - Easy to assemble, but heavy. Comes with the decorative rock and a glass border that looks pretty cool. For me, the first time I tried it, it worked. You may need to hold the igniter down for a few seconds until it gets going. I have it inside a gazebo, so the heat output is perfect. You can utilize a grill propane tank, but you'd have to move it back and forth. This may save $40 if it's worth it to you...When you are not using the actual fire, there is a lid that fits perfectly over the middle and can convert this to an outdoor table. It may be lower than a common outdoor patio set, but it gets the job done.This also comes with a cover for the whole unit. Very happy with this purchase...

This product is great. The only issue I had with assembly was assembling the base to the tabletop the holes did not quite line up. But with a little elbow grease I was able to make it fit. It is sturdy and very attractive. It does not produce as much heat as I had hoped. You may need to add some glass rocks as thy don't cover the burner and everything I read says it should have enough fire glass so that the burner is not visible. This is especially true if you're using a propane gas, since propane is heavier than air and needs to be dispersed close to the flame. I highly recommend this product I don't think you will do better for the price.

We love this table. Thr chairs are from pottery barn snd each is more than the price of this table. We love fire pits and all were way too much mo ey. We found this and trusted the reviews. Ot took my husband about an hour to actually assemble and a bit more to unpack and clean up. HE ADVISES DONT TIIGHTE TEN SCREWS UNTIL THE VERY END. And he did it without beer! He was careful and it came together. It looks really nice and the height is safe for your pets. It is also roomy for your drinks and plates. We ordered different color stones. It seems very well made and all the pieces were in box! The flame output is impressive and you can feel the heat. The glass surrounding is such a nice touch.

When we received this table 4 months ago. We could NOT have been more pleased! Loved it...pretty easy to assemble, and features awesome! We spoke about it often and many friends and family wanted one. In fact, My niece bought the same table, (same seller), the next day! The table surface was a bit of a disappointment initially, when we noticed it was quickly discolored if a drink was placed on it. We lived with that by continuously using coasters and place mats to avoid damage. We kept it dry and protected and used the included cover at all times when not in use. So you can imagine our disappointment when we uncovered the unit recently (as fall chill hit the air) to use it to discover that the surface was completely discolored as per the pics above. No idea what happened, but assume the combo of heat and perhaps trapped moisture/humidity under cover caused this issue. We did all we could to protect this investment and now it is a mess. Contacted seller, but since we are past 60 day warranty...no response from them (except a request to let them know "how it happened" so they could try to avoid the issue in the future). Not helpful at all to us. We didn't use the table much over the summer due to heat, so sadly, this very new table now looks like this. So Disappointed. The unit sill works great and we love it, but the lack of attention/response from seller remains disappointing. This is clearly a factory flaw in the finish, and we did all we could to preserve this table and now are stuck with this.

to start.. I want to mention that I dont write reviews but after a long time of tedious searching and critiquing fire tables I wanted to give some honest feedback on this fire table because the current reviews are all over the place.I was nervous purchasing this because its a good amount of money and some of the reviews mentioned broken or bent parts with no repair or replacement options. I'll break the review out for simplicity.Shipping/packaging:5 stars.. unit came earlier than expected (gave me a date window due to covid and it arrived earlier than expected). The unit is packaged very very well. Took me about the same time to unpack everything as it did to install. Every piece is wrapped and strapped together to prevent any moving or rubbing during Shipping. *for those who received broken or bent pieces it is no fault of the company and I would blame the delivery method*Installation:5 stars .. super easy, just read the directions first. Yes, there's 3 different types of screws.. which seems obvious to me but I guess not to everyone else. The instructions are clear as each screw is numbered, you just have to keep track which is which. Entire process took me about 30-40 min as I went slow screwing things in because I had previously read reviews saying the holes were not machined correctly..this was certainly not the case for me as everything went in smoothly without much effort.Heat output:3 - 4 stars.. its summer and the 3 times I've used it its been 80 degrees so its hard to judge heat output. Sitting close you can definitely feel it but im just not sure if its enough for those cooler months. It could easily be.Looks/build quality:5 stars.. its very sturdy once together. The propane shelf slides easily and closes tight and seamless. The wicker is of good quality and thick. When fully assembled its a very nice stand alone statement piece for our deck.There's gotta be a few Cons right??Well of course, as not everything is perfect. For me its the ignition unit, like a ton of the other reviews, it just doesn't always work for some reason. Its finicky as to when it lites the propane and when it doesn't. I still need to play around with it as it could be user error. To me this doesn't even warrant a negative comment as its easily remedied with a grill lighter.Lastly, because of all the reviews about the metal top becoming stained by water or anything else, I purchased a clear matt finish can of hight heat rustoleum to spray on the metal top. This will help to ensure no staining or tarnishing. I expect this to remedy any future issues simply and easily.To finish, if you made it this far I appreciate it. It took me a while to find the correct fire table for my needs. This one looks fantastic and has the build quality to last a while. I'm quite happy with my purchase and would highly recommend. Cheers!∫Âŧ

The product was fairly easy to put together, looks good, and the heat output is really good. I would give it 5 stars if not for one main issue. The issue I have is the thermo coupler was deficient and needed to be replaced immediately. The thermo coupler sits behind the control knob and regulates the flow of gas between the control knob, the tank, and the burner. The flame will go out in about a minute if the thermo coupler is jacked up. I figured out what was wrong with it by googling it and watching a youtube video that listed it as a possible issue. I am handy so went to Home Depot and get a new part for about $15 (in the gas grill section) and replaced it myself. The company knocked like $80 off for the hassle, so all good.

Very happy with the quality of the product. It arrived on time. My issues was first with the igniter. The Igniter was not adjusted correctly and the spark would sometimes be between the sheet metal cover under the rock holding pan and the igniter. The seal around the igniter does not seem to be well designed or manufactured as it still sometimes sparks under the unit ( gas is only on top so there is not much danger unless one leaves the gas open for a long time). My second issue/suggestion is with the glass option. The glass unit is well designed but it would be nice to have 4 pegs as part of the unit that would go into the glass corner holders to keep the glass in place. It moves too easy with the current design ( the holes already exist in the glass corner holders).My third issue is with the heat sensor in the igniter box. The top of that box has to be almost clear of rocks or the heat sensor does not detect heat and will shut the gas off. It is frustrating to try to see how many rocks it will take to cover the metal part and also keep the unit happy so that it does not shut off.My fourth issue is actually with the extra glass blue or other color rocks that is suggested with the unit. It would be nice to put a comment here to warn the buyer. I had empty the pan twice and refill slowly to see what works. The rocks that come with the unit are fine. The extra glass rocks have all sizes and because they can be small it will not allow gas to come out. The warning should be that any extra rock should be between 1/2 to 1 inch in size in order not to suffocate the gas tube. My suggestion is to sprinkle the high color rocks on top of the glass rocks or you will be spending a lot of time sifting through glass, some are very sharp.